EKPL1A Electronic Keypad EKPL1A Electronic Keypad

TACKLIFE Keypad Electronic Deadbolt Door Lock - EKPL1A

$63.99

* Keyless Entry with a Motorized Driven Deadbolt

* Convenient One-Touch Locking

* Comes in a Sleek & Modern Design

* Easy to Install

* Free Shipping: 3-5 Days Fast Delivery

-
+
$63.99




Product Specification

High Security: ANSI Grade 3 Certified, Keyless entry motorized driven deadbolt, with 6 customizable user codes that can set 4-10 digit codes and One-time codes that can be used just once, perfect for visitors and service personnel - plus a master code option, more secure and convenient to your family.

Humanity Design: Customizable automatic door locking after 10-99 seconds for peace of mind. 1-touch locking and auto-back-lit keypad for increased visibility; Innovative keypad deadbolt lock feature allows you to lock and leave without a key.

Safety Performance: Comes with low battery indicator, needs to replace the battery when the light flashes with sound; press the wrong code 5 times continuously, the system will lock for 45 seconds and the alarm will sound for increased security.

Easy to Install: Single cylinder electronic deadbolt operates by keypad or key outside, easy install with just a screwdriver, fits door thickness of 1-3/8 in. to 2 in. (35mm-51mm); Ideal for front doors, side & back doors, garage entry doors, etc.

Installation Note

  1. 1.Do not use an electric screwdriver during installation or over-tighten the screws.
  2. 2.The black hub of the latch must be in the lower position when fitting the latch into the latch hole.
  3. 3.Fit the alignment of the deadbolt latch and strike plate.
  4. 4.Install cylinder into the deadbolt keypad assembly with tailpiece in horizontal position inserted through the hub.
  5. 5.When installing the receiver assembly, the thumb turn piece is opposite to the latching side and ensures the deadbolt tailpiece is engaged with the turn piece.
  6. 6.Do the door handing identification process first after installation. Make sure the IC wire is connected firmly and the batteries are installed correctly and alive.

Programming Note

  1. 1.Before programming, do the door handing identification process first, the lock needs to learn if your door is a Right-Hand door or a Left-Hand door.
  2. 2.Your lock can only be programmed in the unlocked position, every programming step should be done in 6 seconds.
  3. 3.If you delete all user code the keypad will no longer open the lock, you must use the key to enter the lock.
  4. 4.If you disable all user codes the keypad and auto-locking will no longer open the lock, you must use the key to enter the lock.
  5. 5.After restoring default settings, you must run the operation door handing identification process again before programming any other function.

Recently Viewed Products Recently Viewed Products